NCR SelfServ XK32, Installation Manual

Page: 216 / 251

2-206 Hardware Installation
3. Remove the bundled cables from the bubble wrap.
4. Route and connect the internal cables. Refer to the images following this procedure.
a. Insert the bundled cables through the access hole in the Main Frame, but leaving
the LAN Cable on the lower right side of the Main Frame.
b. Secure the bundle with p-loops along its route.
c. If PIN Pad is used as a payment device, route the PIN Pad cable to the Ebox,
following the route of the bundled cables. Secure the PIN Pad cable with six
cables ties along its route.
Note: A payment device may be an MSR or a PIN Pad. For MSR, the MSR cable
is already bundled and routed together with other internal cables.
d. Connect the Display Power Cable to the Power Strip.
e. Connect the cables to the Primary Terminal. For a complete list of port
assignments, refer to Port Assignments on page 217.