NCR EasyPoint 7401, Hardware User'S Manual

Page: 235 / 280

Chapter 6: Operating System Recovery 6-15
The following drivers are not installed automatically, but can be
installed from their respective locations:
•
Backpack CD-ROM (3.02) C:\Install\Drivers\CDRom
•
Edgeport USB (1.15.2) C:\Install\Drivers\USB
Configures the following settings/revisions:
•
Preinstalls W2K to include the Product ID Number (PID)
•
Places the Gold Drive Part Number, Date Created, LPIN, and
Release in Registry under:
HKey-Local_Machine\Software\NCR\Gold Drive
•
Runs Sysprep, using sysprep.inf and sysprep.bat, so that the mini
installation will run on initial boot with the following parameters:
−
Automatically include PID
•
Establishes a FAT32 primary system partition that fills the entire
drive
•
Includes necessary OS cab files in C:\Install
•
Installs SP1 and SP2
•
Installs SMI Control Panel
•
Installs Intel Proset utility
•
Enables APM
•
Sets APM monitor shutoff' to ‘Never’
•
Enables PME (in Intel Proset utility) set to 'Hardware Default'
•
Enables DMA
•
Sets color to 16 bit
•
Makes PinPad testing folder available in C:\Install\Drivers\PinPad
•
Changes audio hardware acceleration from ‘standard’ to ‘emulation
only’
•
Replaces the standard EULA with the NCR-specific EULA