NCR EasyPoint 7401, Hardware User'S Manual

Page: 195 / 280

Chapter 5: Setup 5-7
BIOS Default CMOS Values (7401-22xx/35xx/45xx BIOS Version
2.2.1.x)
The following are the BIOS default CMOS values for the workstation.
Note: When installing a new BIOS from the CD, the Processor Board
type is automatically detected and the correct BIOS is automatically
installed
Main Values
Note: An asterisk (*) indicates a variable value based on system
specification.
System Time
(variable)
System Date (variable)
Legacy Diskette A: Disabled
Legacy Diskette B: Disabled
Primary Master *
Type Auto
Total Sectors *
Maximum Capacity *
Multi-Sector Transfers 16 Sectors
LBA Mode Control Enabled
32 Bit I/O Disabled
Transfer Mode FPI0 4/DMA 2
Ultra DMA Mode Mode 2
Primary Slave
None
Type Auto
Multi-Sector Transfers Disabled
LBA Mode Control Disabled
32 Bit I/O Disabled