R E L A Y P R O S
11
[Date]
Scan Channel Not Red
If the Scan Channel is not red there is a setup issue, most likely with the
Ethernet module setup. If the Scan Channel is gray, it’s not communicating
with the board, you will need to check your settings in the Module Setup at
the beginning of this manual. Check the Socket Type is set to TCP Server.
Scan Channel Is Red
If the Scan Channel is red it is communicating to the board and you can test
the inputs. The inputs will make the widget change from red to green
when the dry contact circuit is closed. You can now create a Scan Channel
Widget for each of the inputs on the board then setup the automation to
send the text and or email!
Testing Inputs
Using a dry contact (no voltage) input close the contacts of the input you
have set, you will see the Scan Channel widget on your desktop turn to
Green. Release the input, the widget turns to red again.
The Ethernet push notification board is now working with N-Button
software. The widget you created is now showing the status of the input.
You can setup as many scan channels as you have inputs on the board you
purchased. Each one will have its own notification.
Text/Email Setup
N-
Button Manager
Setting up Your First Text/Email
