R E L A Y P R O S
7
[Date]
Advanced Options
When setting up the push notification board there isn’t any settings in the
Advanced Tab that need to be changed. For an overview on the Advanced
Options tab, download the full Gen3 Ethernet Quick Start Guide at:
relaypros.com/start.htm
.
Management
Password Setting
The Web interface is
password protected. The
default password for the
web interface is
admin
. If desired, you
may change this
password using the
Password Setting
Fields. After the new
password is set it will
take effect after the next
power cycle.
Factory Default
It is possible reset the
Gen 3 module to factory
default settings by
pressing this Default
Button
Reset Device
It is possible to power cycle the Gen 3 Module by pressing this Reset
Button.
Logout
This button will log the user out of the web interface. Keep in mind
password changes will not take effect until a power cycle to the module.
