R E L A Y P R O S
3
[Date]
Base Station Software
Base Station Software is our reference tool for designing and testing all
currently manufactured NCD Devices. Base Station will assist you in
learning how any NCD device functions and will provide valuable
diagnostic tools to help determine if your controller is functioning as
designed. Base Station software exercises every supported feature of every
supported device. It is the ultimate reference tool for learning, diagnosing,
and testing NCD devices.
Discovered Network Devices
Base Station will
discover the Ethernet
board on the network
and show you the IP
address assigned to the
board. Select
Discovered Network
Devices button then
click on the IP Address,
this will open your
browser and show you
the Web Interface
Connection and all its
features. By selecting
the Discovered
Network Devices button then clicking OK, Base Station Software will open
showing you the command sets that are available for your board.
Device Command Sets
Base Station software asks the controller which command sets are
supported. The supported command sets are listed when you run the Base
Station software application. Some controllers may show more command
sets while other controllers may show fewer command sets. The Base
Station program will decide which command sets apply to your board.
Make sure you shut down Base Station before running N-Button Software.
N-Button may not connect to the board if Base Station is already
connected.
