R E L A Y P R O S
5
[Date]
Basic Settings
Most settings you will be interested in configuring can be found under
Basic Settings. Here you can configure A static IP address and the type of
socket connection the module should utilize. Here we will review each of
these settings.
Use DHCP
If this box is checked
the module will obtain
an IP Address from
your DHCP server on
the network router. If
this box is checked the
IP Address, Subnet
Mask, Gateway, and
DNS Server fields will
be ignored. If you
intend to enter Static
IP address settings
make sure this box is
NOT checked.
IP Address
This setting is only
applicable if Use DHCP
is unchecked. This
field configures the Static IP address the module should utilize on the
network.
Subnet Mask
This setting is only applicable if Use DHCP is unchecked. This field
configures the Subnet Mask the module should use on the Network it is
connected to.
Gateway
This setting is only applicable if Use DHCP is unchecked. This field should
match the IP address of your network router.
DNS Server
This setting is only applicable if Use DHCP is unchecked. This field will
configure the DNS Server the Module uses for DNS requests.
