R E L A Y P R O S
1
Introduction
Real-Time Status Control
Ethernet Push Notification Board that allows you to connect a dry contact (no
voltage) to the board and send an email or text message when the circuit is
closed. The board will communicate the contact closure information to your
computer through a Ethernet connection. N-Button Software will then send a
text or email from the computer to your selected
recipients.
All the Features You Need…
•
Send SMS or Email Message
•
Compatible with ANY Contact Closure Sensor
Dry Contact (no voltage) input
•
Onboard Ethernet Interface Module
Communicate over your network
•
N-Button Software
Point & Click Interface
Use to Configure Messages
Step-By-Step Instructions
This Manual will give you step-by-step instructions for connecting your
Ethernet Push Notification Board and setting up N-Button Software to send
text and/or emails.
Chapter
1
