R E L A Y P R O S
9
[Date]
Name
–
> You can assign a name to the board. This will be important if
you have more than one board on the network.
Manufacturer
–> National Control Devices
Board Type
–> Push Notification
IP Address/Mac Address
–> The device should be listed in the Discovered
Devices area. Once it is, double click the IP Address and the IP Address,
and Mac Address will populate the Network area above.
TCP/UDP Port
–> Keep default setting for TCP Port (2101) and UDP Port
(3333).
TCP Connection
–> Check the TCP Connection check box.
Click OK to save the device
–> The device will now be in the
device manager. Double clicking this device in Device Manager will allow
you to edit and make changes to the device. The screen shot below has two
devices installed, you can have more than one device on the network with
N-Button.
