Assembling the BRM3 Brain Monitor
Brainz BRM3 Brain Monitor Reference Manual |
15
Attaching and connecting the components
Stage 1: Attaching the Touchscreen Monitor
Before attaching the Touchscreen Monitor, ensure that the height adjustment knob and the tilt
adjustment lever are firmly tightened.
The Touchscreen Monitor and DAU are packaged in the same carton.
1.
Unpack the Touchscreen Monitor and remove the plastic wrapping. Place the Touchscreen Monitor
face down on a clean, smooth work surface.
2.
Locate the four plastic spacers packaged with the tilt mounting bracket. These will sit between
the tilt mounting bracket and the Touchscreen Monitor.
3.
Attach two of the four spacers to the top two holes on the back of the Touchscreen Monitor,
turning the screws three complete turns only. The spacers must only be loosely attached at this
stage. See
Figure 6
.
Figure 6: Attaching the top two spacers to the Touchscreen Monitor
4.
Lift the Touchscreen Monitor onto the top two holes of the tilt mounting bracket.
5.
Insert the two spacers over the two bottom holes on the back of the Touchscreen Monitor and
tighten the screws fully.
Summary of Contents for BRM3
