natus BRM3, Reference Manual

Page: 20 / 100

Brainz BRM3 Brain Monitor Reference Manual |
11
Assembling the BRM3 Brain Monitor
This section contains information about unpacking the BRM3 Brain Monitor, assembling the Roll Pole supplied with the
BRM3 Brain Monitor, attaching the Touchscreen Monitor unit and connecting the components.
Read this section as you unpack the BRM3 Brain Monitor from its shipping packaging, and before you begin to assemble
the device.
The packaged BRM3 Brain Monitor
The BRM3 Brain Monitor is supplied in three cartons:

a large, narrow box containing the Roll Pole components (extendable pole, base with casters,
power supply mounting bracket, Accessory Basket assembly and tilt mounting bracket).

a wide box containing the Touchscreen Monitor, power supply unit, DAU, USB 2.0 cable, USB
memory stick and test sensor lead.

a small box containing the AC power cable, BRM3 Brain Monitor documentation, the AnalyZe
CD, a box of sensors and a sensor application kit.
Assembling the Roll Pole
Stage 1: Unpacking the components
1. Unpack the components of the Roll Pole onto a large flat work surface. Keep the contents of each
carton separate.
2. Check the cartons carefully for fastenings and accessories (normally packed in small plastic bags).
Stage 2: Attaching the Accessory Basket
To ensure stability, the Accessory Basket must be mounted within 32” (80 cm) of the ground.
1. Clip one of the plastic mounting brackets onto the long side of the Accessory Basket
without
the extra horizontal
reinforcing. See
Figure 2
.
2. Slide the mounting bracket up the vertical ribs of the Accessory Basket.
3. Clip the other mounting bracket directly underneath the first one and slide into position.
4. Locate the extendable pole.
5. Slide the Accessory Basket onto the bottom of the extendable pole, positioning it on the lower part of the pole,
within 32” (80 cm) of the ground.