background image

©2016 National Instruments. All rights reserved. 

376597A-01

 Dec16

Refer to the 

NI Trademarks and Logo Guidelines 

at 

ni.com/trademarks

 for more information on NI trademarks. Other product and company 

names mentioned herein are trademarks or trade names of their respective companies. For patents covering NI products/technology, refer to the 
appropriate location: 

Help»Patents

 in your software, the 

patents.txt

 file on your media, or the 

National Instruments Patents Notice

 at 

ni.com/patents

. You can find information about end-user license agreements (EULAs) and third-party legal notices in the readme file for your 

NI product. Refer to the 

Export Compliance Information 

at 

ni.com/legal/export-compliance

 for the NI global trade compliance policy 

and how to obtain relevant HTS codes, ECCNs, and other import/export data. NI MAKES NO EXPRESS OR IMPLIED WARRANTIES AS TO THE 
ACCURACY OF THE INFORMATION CONTAINED HEREIN AND SHALL NOT BE LIABLE FOR ANY ERRORS. U.S. Government Customers: The data 
contained in this manual was developed at private expense and is subject to the applicable limited rights and restricted data rights as set forth in 
FAR 52.227-14, DFAR 252.227-7014, and DFAR 252.227-7015.

Summary of Contents for NI DCM-2316
















Reviews: