NI DCM-2316 Getting Started Guide
|
© National Instruments
|
7
Caution
Damage may occur if the PDU-2300 is not appropriately configured for
the selected supply voltage before connecting power.
Figure 2.
Fuse Placement for 12 V and 24 V Setup
Connecting the DCM to Power
Powering the DCM with the DCM Starter Harness kit requires a 12 V or 24 V, 180 W minimum,
external DC power supply. Recommended power supplies are listed in Table 1 below. The
light-duty power supply leads (14 AWG) included in the DCM Starter Harness kit are
recommended only for bench-top applications which require less than 15 A of current. The
heavy-duty leads (8 AWG) included in the DCM Starter Harness kit are recommended for all
other applications.
What to Use
•
Starter harness light-duty (<15A) or heavy-duty power supply leads
•
Wrench, 1/2-in.
•
NI recommended power supply
Table 1.
Recommended Power Supplies
Power Supply
Part Number
PULS QS10.121 Power Supply
(12 VDC, 15 A, 100-240 VAC/110-150 VDC Input)
783168-01
NI PS-17 Industrial Power Supply
(24 VDC, 20 A, 100-240 VAC/110-150 VDC Input)
781095-01
Tripp Lite PR 60
(13.8 VDC, 60 A, 120 VAC Input)
PR 60
TDK Lambda Genesys 1500W
(0-30 VDC Variable, 0-50 A Variable, 85-265 VAC input)
GEN 30-50
12 V
S
et
u
p
F12
7.5 A F
us
e
F14
Empty
F1
3
7.5 A F
us
e
24 V
S
et
u
p
F12
Empty
F14
7.5 A F
us
e
F1
3
Empty
