National Instruments FOUNDATION NI-FBUS Hardware And Software User Manual Download Page 112

Page: 112 / 178

Chapter 6

NI-FBUS Function Reference

NI-FBUS Hardware and Software User Manual

6-50

ni.com

Return Values

E_OK

The call was successful.

E_INVALID_DESCRIPTOR

The descriptor is no longer valid.

E_BUF_TOO_SMALL

The size of the data resulting from the read of all objects specified
in the list is larger than your buffer.

E_RESOURCES

A system resource problem occurred. The resource problem is
usually a memory shortage.

E_SERVER_CONNECTION_LOST

The session established with the NI-FBUS Communications
Manager for this descriptor has been closed or lost.

Summary of Contents for FOUNDATION NI-FBUS



















































































































































































Search results

Summary of Contents for FOUNDATION NI-FBUS

Reviews:

Related manuals for FOUNDATION NI-FBUS

Brands by name

Popular brands

National Instruments FOUNDATION NI-FBUS, Hardware And Software User Manual

Search results

Summary of Contents for FOUNDATION NI-FBUS

Reviews:

Related manuals for FOUNDATION NI-FBUS

Brands by name

Popular brands