National Instruments FOUNDATION NI-FBUS Hardware And Software User Manual Download Page 99

Page: 99 / 178

Chapter 6

NI-FBUS Function Reference

National Instruments Corporation

6-37

NI-FBUS Hardware and Software User Manual

E_NOT_FOUND

The named object does not exist.

E_MULTIPLE

Multiple identical tags were found; the function failed.

E_OBSOLETE_DESC

The input descriptor is no longer valid. It was closed before

nifGetObjectSize

completed.

E_ORDINAL_NUM_OUT_OF_RANGE

The ordinal number is out of the device range.

E_SERVER_CONNECTION_LOST

The session established with the NI-FBUS Communications
Manager for this descriptor has been closed or lost.

Summary of Contents for FOUNDATION NI-FBUS



















































































































































































Search results

Summary of Contents for FOUNDATION NI-FBUS

Reviews:

Related manuals for FOUNDATION NI-FBUS

Brands by name

Popular brands

National Instruments FOUNDATION NI-FBUS, Hardware And Software User Manual

Search results

Summary of Contents for FOUNDATION NI-FBUS

Reviews:

Related manuals for FOUNDATION NI-FBUS

Brands by name

Popular brands