National Instruments FOUNDATION NI-FBUS Hardware And Software User Manual Download Page 79

Page: 79 / 178

Chapter 6

NI-FBUS Function Reference

National Instruments Corporation

6-17

NI-FBUS Hardware and Software User Manual

Return Values

E_OK

The call was successful.

E_INVALID_DESCRIPTOR

The input descriptor is invalid.

E_CONFIG_ERROR

Some configuration information, such as registry information or
network configuration information, is incorrect.

E_NOT_FOUND

The interface name, device ID, or link ID you specified is not
found.

E_RESOURCES

A system resource problem occurred. The resource problem is
usually a memory shortage.

E_BAD_ARGUMENT

The

interfaceOrDevID

value is not valid.

E_OBSOLETE_DESC

The input descriptor is no longer valid. It was closed before

nifOpenLink

completed.

E_SERVER_CONNECTION_LOST

The session established with the NI-FBUS Communications
Manager for this descriptor has been closed or lost.

Summary of Contents for FOUNDATION NI-FBUS



















































































































































































Search results

Summary of Contents for FOUNDATION NI-FBUS

Reviews:

Related manuals for FOUNDATION NI-FBUS

Brands by name

Popular brands

National Instruments FOUNDATION NI-FBUS, Hardware And Software User Manual

Search results

Summary of Contents for FOUNDATION NI-FBUS

Reviews:

Related manuals for FOUNDATION NI-FBUS

Brands by name

Popular brands