National Instruments FOUNDATION NI-FBUS Hardware And Software User Manual Download Page 120

Page: 120 / 178

Chapter 6

NI-FBUS Function Reference

NI-FBUS Hardware and Software User Manual

6-58

ni.com

E_COMM_ERROR

An error occurred when the NI-FBUS Communications Manager
tried to communicate with the device.

E_ALARM_ACKNOWLEDGED

The alarm has already been acknowledged.

E_MULTIPLE

There are identical block tags.

E_NOT_FOUND

There is no such block in the device or VFD with the specified tag.

E_SYMBOL_FILE_NOT_FOUND

The NI-FBUS Communications Manager could not find the
symbol file.

E_SERVER_CONNECTION_LOST

The session established with the NI-FBUS Communications
Manager for this descriptor has been closed or lost.

Summary of Contents for FOUNDATION NI-FBUS



















































































































































































Search results

Summary of Contents for FOUNDATION NI-FBUS

Reviews:

Related manuals for FOUNDATION NI-FBUS

Brands by name

Popular brands

National Instruments FOUNDATION NI-FBUS, Hardware And Software User Manual

Search results

Summary of Contents for FOUNDATION NI-FBUS

Reviews:

Related manuals for FOUNDATION NI-FBUS

Brands by name

Popular brands