![background image](http://html.mh-extra.com/html/nateks/voicecom/voicecom_installation-manual_708125022.webp)
18
SIP Proxy Settings
Please click “
Network Settings
”.
The settings window will then appear as below.
Proxy Setting Instructions
Ÿ
Uses Proxy Server: If users wish register a Gateway.
Ÿ
Use OutBound Proxy An outbound proxy server handles SIP call signaling as a standard SIP proxy
server does and further it receives and transmits phone conversation traffic (media) in between two
talking gateways. This option tells the gateway to send and receive all SIP packets to the destined
outbound proxy server rather than the remote gateway. This helps VoIP calls to pass through any
NAT protected network without additional settings or techniques. Please make sure your VoIP
service provider supports outbound proxy service before enable it.
Ÿ
Proxy Server: enter the Proxy Server IP address or URL (Uniform Resource Locator).
Ÿ
Proxy Server Port: Enter the Proxy Server
listen
port number. (The factory default value is 5060)
Ÿ
TTL (Time To Live): Enter the desired time interval at which the Gateway will report to you Proxy
Server
Ÿ
Proxy Server Realm: Enter the correct registered Proxy Server Realm name to avoid registration
failure.
Ÿ
SIP Domain: Enter the correct SIP domain to avoid registration failure (it is not necessary to set
with some Proxy Servers).
Ÿ
Uses Domain to Register: register with using SIP domain.
Ÿ
Uses Public Account
NOTE: only one password is used.
Summary of Contents for voicecom
Page 2: ......