10
PPPoE Account Settings
Ÿ
After entering IVR mode, dial 121.
Ÿ
After hearing “Enter value”, enter the account number, followed by ”#”.
Example: If the account is “84943122 @ nateks.ru”, please enter 08 04 09 04 03 01 02 02 71 54 41 60 45 51 59 72 58
61 #.
Please note that it is necessary to enter two digits for each character/number; for example, enter
01 for
and 11 for
.
PPPoE Password Setting
Ÿ
After entering IVR mode, dial 122, after hearing “enter value” followed by “#”.
Example: If the password is “3ttixike”, please enter “03 60 60 49 64 49 51 45#”.
Save Settings and Restart
To save settings, dial
509
(Save Settings). The system will save the settings and please restart the system.
Please wait for about 30 seconds for the system to restart, and then enter
101
to check if the IP address is
obtained. If the IP address is not repeated, it indicates that Gateway has not been properly connected,
please check if the cable, account, or password are correct.
Summary of Contents for voicecom
Page 2: ......
