![background image](http://html.mh-extra.com/html/nateks/voicecom/voicecom_installation-manual_708125021.webp)
17
Telephony Settings
The telephony settings are used to set Gateway numbers.
Ÿ
International Call Prefix Digit: Enter the International call prefix.
Ÿ
Country Code: Users please select his/her country code.
Ÿ
Long Distance Call prefix Digit: It is the long-distance prefix digit for making a long-distance call.
Ÿ
Area Code: Please enter the area code.
Ÿ
Phone Number: Please enter the telephone number used.
Example of Telephony Settings: e.g. Settings for a VoIP Gateway in Taichung, Taiwan.
International Call Prefix Digit: 810
Country Code: Russia (7)
Long Distance Call Prefix Digit: 0
Area Code: 095
Phone Number: 3568
Ÿ
FXS Display Caller ID: Select whether or not to enable the caller ID display function to show the
phone number of an incoming call.
Ÿ
FXO detect caller ID: Add a new option to detect the Caller ID delivered from PSTN to the FXO
port. While enabled, the Caller ID detected on the FXO port will be send to the SIP Proxy Server on
dialing out calls.
Ÿ
Anonymous Call Out(CLIR): call out without showing caller ID.
Ÿ
Trunk Incoming prompt voices: Select the greeting (must use the IVR 132 function to record a
voice file) when ISDN trunk receives an inbound call.
Ÿ
Trunk Extension Number as assigned Call Out Channel: Users are free to call out from a desired
channel, if assigned. If you register to a Proxy it MUST be checked.
Ÿ
Trunk Extension Number was assigned Call Out Channel can be left empty Allows user just to dial
703 –the Trunk channel No.- to use the PSTN line connect on Trunk. If you register to a Proxy it
MUST be checked.
Ÿ
Ring Time Limit(10 - 600secs)
The maximum time to cancel an no answering call.
Ÿ
Use End of Digit Tone: After invite to a UA, the system will send a DO-DO tone.
Summary of Contents for voicecom
Page 2: ......