15
Books Manager.
Ÿ
Phone Books Manager Login Password: Enter the registered password. If this system is serving as
the Phone Books Manager, the set password is also the password used for registering other Gateway
systems.
Ÿ
Phone Books Manager: Enter the IP address for the Phone Books Manager. It supports URL
(Uniform Resource Locator).
Ÿ
Phone Books Manager Port: The protocol communication port for transmitting signals between the
Phone Books Manager and other Gateway systems. Please confirm whether the setting is the same
as that for the Phone Books Manager.
Ÿ
Share Local Phone Book: While this option is enabled and the gateway is performing as a Phone
Books Manager, this gateway will append its local Phone Book entries to the Manager for other
clients to lookup.
Ÿ
TTL (Time to Live): If a Gateway system that is controlled by the Phone Books Manager does not
report back within the deadline set by TTL, the system will be excluded from the user’s list. Each
Gateway should report to the Phone Books Manager once every 30 seconds.
ToS/DSCP Setting
Ÿ
Uses ToS (Type of Service): The voice packet has the highest priority to ensure telecommunication
quality.
Ÿ
Uses DSCP : The voice packet has the highest priority to ensure telecommunication quality.
Ÿ
HTTP Server Port: Http port for WAN. To make this setting, the LAN Port must be used. Settings
cannot be made using the WAN Port. Connect to LAN port always use port 80.
Network Settings (LAN)
Ÿ
Network Settings (LAN): Gateway LAN Port IP address and the subnet mask value. Please note that
Gateway is built under NAT: Gateway LAN Port IP address cannot be in the same section as the
NAT LAN Port IP address, or else it is unable to make or receive calls. For example, if the NAT
LAN Port IP address is 192.168.8.1, then Gateway LAN Port cannot be ranged between 192.168.8.1
~ 192.168.8.254. If so, please change the LAN port IP address, (e.g. setting the IP address to
192.168.99.254.)
Summary of Contents for voicecom
Page 2: ......
