12
4. Setting a Gateway with WEB Browser
Gateway allows users to make settings using a web browser. After opening a browser, enter Gateway IP
address as the website address in order to enter the Web configuration screen as shown in the following
diagram. (Using the IE Browser for example: Enter http
//192.168.1.2 .
The factory default WAN IP address for Gateway is
192. 168. 1. 2
.You can also enter ”101” from the handset to
inquire about the current WAN Port IP address. The factory default LAN Port IP address is 192.168.8.254.
Instructions
Ÿ
Open an Internet browser.
Ÿ
Enter Gateway WAN Port IP address in the website address (If the PC is connected to the LAN Port,
enter the LAN Port IP address. The default is 192.168.8.254)
Ÿ
The following registration screen will appear (The factory default settings for
Username and
Password are set to blank
).
Ÿ
After completing and confirming the settings, some of the settings will take effect immediately. But
the network related settings would take effect after Gateway is restarted. Please go to
System
Operation
to save the settings before restarting the system.
Please enter the correct username and password. To avoid several people simultaneously configuring the
web and causing problems to users, if a user log in to the system, other users from different IP addresses
cannot login at the same time. Please remember to logout or restart the system if not using the web
configuration function.
Summary of Contents for voicecom
Page 2: ......
