9
IP Configuration Settings—Setting IP Configuration of WAN Port
Static IP Settings
NOTE: Complete static IP settings should include a static IP (Option 1 under114), IP address (111),
Subnet Mask (112), and Default Gateway (113). Please contact your local Internet Service Provider
(ISP) if have any questions.
Function
Command
Select a Static IP
Ÿ
After entering IVR mode, dial 114.
Ÿ
After hearing “Enter value”, dial 1 (to select static IP)
IP address Settings
Ÿ
After entering IVR mode, dial 111. After hearing “Enter value”, enter your IP
address, followed by “#”.
Example: If the IP address is 192.168.1.200, dial 192*168*1*200#.
Subnet Mask Settings
Ÿ
After entering IVR mode, dial 112. After hearing “Enter value”, enter your
netmask, followed by “#”.
Example: If the mask value is 255.255.255.0, dial 255*255*255*0#.
Default Gateway Settings
Ÿ
After entering IVR mode, dial 113. After hearing “Enter value”, enter your default
gateway’s IP address, followed by “#”.
Example: If the Default Gateway is 192.168.1.254, dial 192*168*1*254#.
Save Settings and Restart
Ÿ
To save settings, dial
509
(Save Settings). The system will save the settings and
please restart the system. Please wait for about 30 seconds for the system to
restart, and then enter
101
to check if the IP address is obtained. If the IP address
is not repeated, it indicates that Gateway has not been properly connected, please
check if the cable, account, or password are correct.
Dynamic IP (DHCP) Settings
After entering IVR mode, dial 114.
After hearing “Enter value”, dial 2 (to select DHCP).
Saving settings –press 509 (Save Settings). Please restart the system. After the system is restarted, press
101 to check if the IP address is obtained.
If the system does not repeat the IP address, it indicates Gateway has not been properly connected
to the Internet. Please check the cable.
ADSL PPPoE Settings
NOTE: Complete PPPoE settings should include: Select PPPoE (Option 3 of 114), PPPoE account
(121) and PPPoE password (122).
Please contact your local Internet Service Provider (ISP) if have any questions.
Select a PPPoE
Ÿ
After entering IVR mode, dial 114.
Ÿ
After hearing “Enter value”, dial 3 (to select PPPoE).
Summary of Contents for voicecom
Page 2: ......
