background image

29

NARVON

11. EQUIPMENT LIMITED WARRANTY

Parts and Labor
Unless otherwise stated, Narvon Beverage Equipment warrants to the original purchaser of new Narvon Beverage 
dispensers and slushy machines, that such equipment will be free from defects in material and workmanship for a 
period of 1 year from the original date of delivery. Valid only in the Contiguous United States. The warranty is not 
transferable and cannot be changed for a previously purchased product. The 1 year parts and labor warranty applies 
to only the following models. 

378NS, 378SM – 5 years compressor, 3 years electronics, 2 years parts, 1 year labor
378D5G3, 378D5G4, 378D10G2 – 1 Year

1 Year Replacement Warranty
Unless otherwise stated, Narvon Beverage Equipment warrants to the original purchaser of new Narvon Beverage 
dispensers and slushy machines, that such equipment will be free from defects in material and workmanship for a 
period of 1 year from the original date of delivery. Valid only in the Contiguous United States. The warranty is not 
transferable and cannot be changed for a previously purchased product. The 1 year replacement warranty applies to 
only the following models.

378D26G2, 378D26G4, 378D5G1, 378D5G2, 378D10G1

What This Warranty Does Not Cover
•  Narvon Beverage Equipment will not warrant coverage for component failure or other damages that arise under 

the following conditions:

•  Failure to install and/or use the unit within proper operating conditions specified by Narvon. This includes 

installation in any and all outdoor or mobile applications.

•  Failure to properly maintain the unit. This includes, but is not limited to, basic preventative maintenance like 

cleaning. It is the operator’s responsibility to clean the unit.

•  Installation in non-commercial setting, units installed in a residence are not covered under warranty. Contact your 

authorized dealer for assistance. 

•  Products sold or used outside of the Contiguous United States.
•  Any damage that occurs as a result negligence or improper handling.
•  Additionally, no claims can be made against this warranty for spoilage of products, loss of profits, or any other 

consequential damages. Normal wear type parts, are not included in warranty coverage.

•  Solutions used in Narvon Beverage Equipment must be between 11 and 20 degrees Brix. Using solutions outside 

of this range will void warranty.

•  Narvon recommends Narvon brand slushy mixes, mixed according to the manufacturer recommendation. All 

other solutions used in Narvon Beverage Equipment must be mixed according to manufacturer recommendations 
or measure between 11 and 20 degrees Brix. Using solutions outside of this range may void the warranty.

Any action for reach of this warranty must be commenced within 6 months of date on which the breach occured. 
No modifications of this warranty, or waiver of its terms, shall be effective unless approved in a writing signed by the 
parties. The laws of the  Commonwealth of Pennsylvania shall govern this warranty and the paries’ rights and duties 
under it. Narvon shall not under any circumstances be liable for incidental or consequential damages of any kind, 
including but not limited to loss of profits.

Summary of Contents for SLUSHY 378SM2































Reviews: