C2410C EZ-FIT
®
CUP DISPENSER INSTALLATION INSTRUCTIONS
5 3
/4”
Di
a.
146
m
m
HOLE SAW RECOMMENDED
1. CUT HOLE IN COUNTER SURFACE
2. REMOVE TRIM RING TURNING
COUNTER CLOCKWISE
3. SECURE CUP DISPENSER TO COUNTER
WITH SUPPLIED SCREWS
4. SELECT PROPER SIZE GASKET FOR CUP
(SEE TABLE ON BACK)
5. INSTALL GASKET OVER POSTS IN
UNDERSIDE OF RING
6. REPLACE COVER RING WITH GASKET BY TURNING
CLOCKWISE OVER MOUNTING RING UNTIL SECURE
7. LOAD CUPS THROUGH GASKET
REPLACEMENT PARTS & ACCESSORIES
(see reverse side for replacement gaskets)
X24MT
Black Mounting Ring (new low profile)
X24TR
Black Trim Ring (new low profile)
XC24KIT
Replacement Trim Rings (old & new)
C2415 Spring
C2413BK
End Cap
100458BK
Cup Pusher
C2412SV
Wire Cage for Surface Mount
C24XC
Chrome Finish Trim Ring
