19
NARVON
After that, turn off both the main switch and mixer switch
and unplug the machine.
7.2. Disassembling the
dispensing tap
Before removing the bowl it is recommended to disassemble
the tap; after cleaning, the tap must not be reapplied until
the bowl has been correctly positioned, in its seat.
Disassemble the tap by removing the pin from its seat to
release all the other parts. Push the push lever dispenser
until it makes contact with the tank and pull upwards as
shown.
These components may be placed in a basin containing hot
water (approx. 50° C / 122° F); they must later be treated as
described in Section 7.4.
Never disassemble the tap if the product or
any other liquid is present inside the bowl.
7.3. Removing the bowl and the lid
Removal of every machine bowl is fundamental to ensure
correct cleaning and sanitization.
To remove a bowl correctly proceed as follows:
1. Remove the lid as shown in Section 6.1.;
2. Raise the front part of the bowl to release it;
3. Remove the bowl from its seat by pushing and tapping
lightly on the rear part;
4. Remove the seal (B);
Fig.29
Fig.30
Fig.31
Fig.32
Fig.33
Fig.34
B
Fig.34
