21
NARVON
Important Note: Always check the seal
integrity; should it be worn, replace it with a
new one. Replace the seal (A) once a year at
least.
Using food safe lubricant, lubricate the seal (A) in the areas
shown in the Fig.38.
Mount the seal (B) on the bowl.
Introduce the auger, engaging head (C) with shaft (D). Check
that the gasket (J) is placed in its lodging.
Note: Rotate the auger to engage it.
Set the bowl back in place slightly; raise head (C) of the
auger so that it meets the seat provided (E) in the bowl.
Press the bowl downward until it engages the surface as
shown in the figure.
Using the food safe lubricant provided, adequately lubricate
the hooks and the joint
Fig.38
Fig.39
Fig.40
D
C
J
Fig.41
E
C
Fig.42
Fig.43
