NARGESA C2006, Instruction Book

Page: 10 / 71

C2006 HYDRAULIC SHEAR INSTRUCTIONS BOOK 9
WARNING: Stop the machine to make the maintenance.
3. MAINTENACNE
3.1. General maintenance
- The oil container level must be checked every 1000 hours of work.
The peephole to the oil level is located in the upper part of the container. In case there is a lack of oil, just
fill it up to the peephole mark.
- Replace the hydraulic oil container every 4000 hours of work.
- Oil: CEPSA HYDRAULIC HM 68
Once the oil has been changed, it is necessary to start up the machine and activate the pedal in
intermittence by increasing the pressure time gradually until the circuit is full.
- Grease up the bolts periodically according to the level of use.
- If it is a steady and daily use, they must be greased avery month.
- Lubricate the top spindles weekly with grease or oil.
- Lubricate all guides greasers every month.
Drain plug
Oil dipstick
Fill plug