29
W415-1539 / A / 04.19.16
EN
* When constructing the enclosure allow for fi nishing material thickness to maintain clearances.
IMPORTANT: Before fi nishing in the appliance test the operation using the remote control, cycling
it through all of its different modes, see “OPERATION” section. Should troubleshooting be required,
access to the controls can be made through the pre-fi nishing access panel.
2" 51mm
STAND OFF
Minimum
INSULATION
DRYWALL
1613mm
MINIMUM
1365mm
514mm *
1270mm
MINIMUM
53 3/4”
20 1/4”
50”
63 1/2”
FROM DRYWALL
NOTE: TOP HEADER MUST BE
INSTALLED AFTER FIREPLACE
HAS BEEN POSITIONED.
