W415-1013 / C / 11.19.13
10
EN
4.0 UNCRATING AND ASSEMBLY
If the crating is too large for maneuvering in the doorways and staircases, remove the crate verticals, diagonals
and top pallet.
•
Primary Air Control Kit
•
Main / Electrical Harness Kit (1 pc.)
•
Bricks (37 pcs. HMF150, 53 pcs. HMF200)
• Baf
fl
es (2 pcs.)
•
Secondary Air Tubes (4 pcs. HMF150, 5 pcs. HMF200)
•
Installation and Operating Manual
•
Limit Switch and Mount Bracket (Plenum) (2 pcs.)
•
Stand Offs and Hardware
CAUTION
MANOUVERING AND PALLET RE-
MOVAL REQUIRES A MINIMUM OF
TWO PEOPLE.
CAUTION
HIGH CENTRE OF GRAVITY! THIS UNIT IS VERY TOP
HEAVY! USE CAUTION WHEN MANOEUVRING OR RE-
MOVING THE FURNACE FROM THE BASE PALLET.
LIFTING
POINTS
LIFTING
POINTS
4.1 CRATED UNIT CONTAINS
4.2 RECOMMENDED
STEP
H3.36
THE BASE PALLET IS SECURED TO THE FURNACE BY ADJUSTING THE LEGS AT THE BOTTOM OF
THE FURNACE.
THE BASE PALLET SHOULD NOT BE REMOVED UNTIL THE FURNACE IS PLACED CLOSE TO ITS
FINAL INSTALLATION LOCATION!
LIFTING OF THE FURNACE SHOULD BE THROUGH THE BASE PALLET - LIFTING OF FURNACE BY
METAL BASE HOUSING CAN RESULT IN DAMAGE
