EN
W415-1596 / B / 10.12.18
37
remote control operation
Low battery alarm
Key Lock
Room
Temperature
Light
Flame ON
Blower
Transmission
CPI mode
A.
Power the receiver.
B.
Press the reset button to begin the programming process.
C.
The receiver will BEEP 3 times to indicate that it is ready to synchronize with a
transmitter.
D.
Install the 3 AAA batteries into the transmitter battery bay, located on the base of the
transmitter, then press the “ON” button. The receiver will BEEP 4 times to indicate the
transmitter’s command is accepted and sets to the particular code of that transmitter.
The system is now initialized.
NOTE: THE INITIALIZING PROCESS MUST BE COMPLETED WITHIN 10 SECONDS
OF PRESSING THE RESET/PROGRAMMING BUTTON.
TRANSMITTER
RECEIVER
RESET
BUTTON
11.0 remote control operation
11.1 general transmitter layout
11.2 initializing the transmitter for the first time