![background image](http://html.mh-extra.com/html/modern-flames/mf-pro-wtc/mf-pro-wtc_quick-start-manual_1817726001.webp)
©2019
www.modernfl ames.com
Please dispose of properly.
V1
Wireless Wall Mounted Touch Control
MF-PRO-WTC
NEW PART # TH-WTC/LP
PAIRING THE WALL CONTROLL
1.
With the fireplace ON press and hold the ON/OFF button for
about 3 seconds until you hear the buzzer sound twice and the power
indicators begin to flash. (power indicators located top right of viewing
area)
2.
Within 5 seconds on the wall control press the ON/OFF(power)
button repeatedly until the buzzer sounds again and the indicators flash
acknowledging that it has paired. You may also hear another buzzer and
the pair is now completed.
-Pairing must be done within 5 seconds or the fireplace will time out of
pairing mode.
-To clear any paired remotes from the unit locate then press and hold
the reset button for 3 seconds. You should hear a buzzer letting you
know the codes have been cleared so you can now pair a new remote or
wall control. (The reset is located next to the manual controls and can be
pressed with a paper clip.)