nCounter Pro Analysis System User Manual
SEV-00184-01
FOR RESEARCH USE ONLY. Not for use in diagnostic procedures.
32
Update or Disable User
To update an existing user profile, select that profile and press the update button (Figure 41). The
user information will appear, very similar to the process of creating a new user. Select and edit fields
as necessary, then press the save button. Press back to return to the ‘User Management’ screen
without making any changes.
To disable an existing user profile, select that profile and press the delete button (Figure 41). The
green circle next to the user profile will change from green to red, and the user profile can be
reactivated later by using the update function. See the user “jdb” in Figure 41 as an example. Be
aware that user profiles can never be truly deleted, as this would invalidate the audit trail.
Login Settings
The ‘Login Settings’ screen (Figure 43) enables the administrator to require that users log in before
using the Digital Analyzer. Press the login button to toggle this field between “enabled (password
protected)” and “disabled.”
These login settings can be adjusted. Press the
timeout button to change the time required
before the system locks the screen due to
inactivity. For example, a ten-minute timeout will
allow the instrument to wait ten minutes without
receiving new commands. Set the timeout to
zero to disable the timeout. Be aware that the
screen will lock automatically when a new run
begins if the login setting is enabled. Users can
also lock the screen by logging out.
Figure 43: The Login Settings screen.
Summary of Contents for nCounter Pro
Page 1: ......
