WP015(v1.0)2017-05-05
Fig9. CAR28T test interface
In Figure 9 at this point, the interface shows that the radar detects two moving targets, where the
parameter A represents the target angle, R represents the radial distance of the target (the
distance from the target to the radar)
Note:
Check "save data" in the page to the local check box, and the target data captured by radar will
be stored in text format under the Data folder in the millimeter-wave radar general management
tool installation path folder.
The suggested test sites
:
CAR28T should be tested in open areas outdoors, due to that there are many interference for the
indoor test, which will lead to the discontinuous target track.
4.4 Online upgrade for product firmware
CAR28T support online upgrade. After customers purchase products, if the product program
needs to be upgraded, you can turn to Nanoradar's customer service or Nanoradar's official
website to obtain Nanoradar's millimeter wave radar upgrade tool and upgrade program. The
upgrade tool interface is as shown below. And the use method of PC software please refers to
the user manual of Nanordar's Radar Upgrade Tool.