Using buttons on the Radio
1. Rotate the Tune/Select knob to browse the numbers/symbols/
characters available, press the
<Right>
key to enter and move to
the next entry.
2. After the entries are finished, press the Tune/Select knob to
confirm.
3. It will start associating with your network.
Using remote control
1. Use the alpha-numeric keypad on the remote control, press the
button repeatedly to cycle through the selections.
2. Press the
key to enter and move to the next entry.
3. When the entries are finished, press
<Enter>
to confirm and it will
start associating with your network.
After the radio is powered up, follow the steps on the display to Add
AP, it will start scanning the routers available and display a list after
scanning is done. Choose your router from the list. If your network is
enabled with security protection, you will be asked to enter the
passcode to connect with your network.
Follow the steps below to enter the passcode on your radio:
Quick Start Guide
–Entering security key of your Router
07:01AM
c
D
aA . . . d
D
e . . . zZ 2/2
LEFT TO DELET
DIAL TO CHOOSE;
Press to confirm
