NAiS GT01, Technical Manual

Page: 72 / 108

GT series
GT01 Configuration Settings
52
5.3 Entering Configuration Settings from the GT01 Main Unit
5.3 Entering Configuration Settings from the GT01 Main
Unit
5.3.1 What is the System Menu?
The system menu is a dedicated screen on which configuration settings for the GT01
are entered. Some of the items that can be specified here can also be set using GTWIN
screen creation tool and then sent to the GT01, but others, such as the adjustments to
the LCD contrast level, can only be set using the system menu. This section explains
how configuration settings are entered using the system menu.
5.3.2 Bringing Up the System Menu
The following procedure is used to bring up the system menu.
(1) Touch the LCD touch panel simultaneously.
1. Press the top left corner (A) for more than one
second.
2. Next, immediately press the top right corner (B)
and the bottom right corner (C), in that order.
(2) The initial screen of the system menu is displayed.
The initial screen of the system menu is displayed on
the GT01. Touching either the [Setting] or [Test] key
shifts to the next screen.
Touching the [ESC] key exits the system menu and re-
turns to the normal operating mode.
“System Ver” indicates the ROM version of the GT01 system.
(3) Select the mode.
[Setting]: Setting mode initial screen
This is where configuration settings for the GT01, such
as the contrast, clock, COM. port, TOOL port, and
memory, are specified.
[Test]: Test mode initial screen
This is where GT01 configuration elements such as
the touch switches, backlight, clock, buzzer, LCD,
contrast, and memory are tested.