N-Tron ESERV-M12T, User Manual

Page: 58 / 71

Appendices ESERV-M12T Modbus Gateway
53 ESERV-M12T (Rev. 1210)
CONTROLS, INDICATORS AND CONNECTOR SPECIFICATIONS
Switches Reset button
Hold in for 0 to 2 seconds for hardware reset
Hold in for 2 to 10 seconds for Console Mode (Do a hardware reset or recycle
power to exit Console Mode)
Hold in for more than 10 seconds to reset to factory defaults
Indicators
Serial LED
(one per port)
Color = Green
On = Port open
Blink = Data traffic
Link LED
Color = Green
On = 100BaseTX
Off = 10BaseT
Blink = Data traffic
Ready LED
Color = Green
Blink (once per second) = System OK
Off = System NOT OK
Connectors
10BaseT/100BaseTX
Ethernet
Single RJ-45F (8 pin)
ST fiber ST connector
Serial Two pluggable lockable 5.08 mm terminal blocks
DC Power 5.08mm 2-position pluggable, lockable terminal block