Setup and Connections
ESERV-M12T Modbus Gateway
10
ESERV-M12T
(Rev. 1210)
CONNECTING ESERV-M12T MODBUS GATEWAYS TO A NETWORK
NETWORK CONNECTION (10BASET/100BASETX)
When connecting a Modbus gateway equipped with a 10BaseT/100BaseTX network
connection
(RJ45 connector) a standard network cable is connected from the Modbus gateway to a network
drop. PCs configuring and/or communicating with the Modbus gateway are also connected to the network.
ESERV-M12T CONFIGURATION CONNECTIONS
ESERV-M12T Modbus Gateways can be configured over the network or via a serial port.
CONFIGURING THE ESERV-M12T MODBUS GATEWAY VIA THE NETWORK CONNECTION
When configuring via the network, either Modbus Gateway Manager software or the web interface can be used.
CONFIGURING WITH
MODBUS GATEWAY MANAGER
ESERV-M12T Modbus Gateways can be configured over the network Modbus Gateway Manager software running
on a PC.
To open the
Modbus Gateway Manager
:
1.
From the Desktop, click Start
Programs
N-TRON
Modbus Gateway Manager
Configuration Manager.
Summary of Contents for ESERV-M12T
