N-Tron ESERV-M12T, User Manual

Page: 17 / 71

Setup and Connections ESERV-M12T Modbus Gateway
12 ESERV-M12T (Rev. 1210)
Figure 13. Modbus Gateway Manager Login Screen
3. Configure your Modbus gateway as required.
Note: For more information on configuration options refer to Section 4: Description of Modbus
Gateway Properties.
CONFIGURING THE ESERV-M12T MODBUS GATEWAY ON NETWORKS WITHOUT A DHCP
SERVER
Your Modbus Gateway comes from the factory set up to receive an IP assignment from a DHCP Server. If there is
not a DHCP server on your network, the Modbus Gateway will default to IP address
169.254.102.39 . If this address
does not work with your PC, there are two methods to manually configure the network information.
1. Method 1: Change your PC Network to Match the Modbus Gateway
a. Open your network connection