YETI
Edition 7 / 2022-10-25
18 |
P a g e
Removing the stroller upholstery
We remove the upholstery using the previous steps in reverse order, i.e. unfasten the seat upholstery
straps and remove this upholstery by "pulling" it away from the Velcro. Detach the sides of the backrest
in the backrest upholstery and remove the upper backrest protection. Unhook all the straps and remove
the backrest upholstery. Then remove the wrappers from the frame. The last step is to open all upholstery
base straps and remove them from the frame. The upholstery must be protected against damage.
Adjustable tension system
The adjustable tension system is an extensive set of as many as 14 independent
velcro strips, which allow you to adjust the tension of both the seat and the
backrest to the individual needs of the child.
This system consists of 7 belts on the backrest and 7 belts on the bottom of the
seat, and the adjustment is made by their appropriate tension or loosening.
Thanks to this mechanism, it is possible to collapse in a point or complete
manner in the seat and backrest and to increase support through a
comprehensive or point increase in the stiffness/tension of both the seat and
the backrest.
Seat and backrest upholstery adjustment
The seat can be adjusted in the range of 31 to 45cm. This is done by
extending the frame (see point 9.11) and adjusting the upholstery to the
required parameters. To change the seat depth parameters, remove the seat
upholstery, adjust the seat frame in terms of depth by sliding in or out the seat
frame to the desired size. The seat frame can be extended by 15 cm. Then place
the seat upholstery on the seat base and attach it with Velcro (see item 10.1).
The backrest can be adjusted from 65 to 85cm. This is done by extending
the frame (see point 9.13) and adjusting the upholstery to the required
parameters. In order to change backrest height parameters, detach the upper part of the backrest
upholstery from the clamping straps at the back of the stroller and then adjust the upper frame of the
stroller by extending or sliding the upper part of the backrest to the correct position. The adjustment
range is 20cm. After choosing the right position, arrange the upper part of the upholstery adapting it to
the frame. If the stroller is in the minimum backrest position, the upholstery may need to be rolled up
on the upper part of the frame. The upholstery from above
should be fastened with straps to the buckles (lower in the
case of a stroller with the smallest backrest, upper buckles in
the case of the seat in the largest position). Before placing the
child, adjust the tension of the seat upholstery (Fig. 10.3.1)
and the backrest (Fig. 10..3.2) by adjusting the set of belts.
In order to correctly position the sides of the
upholstery, the strings should be adjusted with the
"pull" upholstery. For a stroller a sitting position, excess
Fig. 10.2.1
Fig. 10.2.2
Fig. 10.31
Fig. 10.3.2
