YETI
Edition 7 / 2022-10-25
13 |
P a g e
Rear wheels. Installation and removal of rear wheels on the axle
The used, durable wheels guarantee the highest quality of stroller driving,
driving pleasure and elegant appearance. The tires are tubeless, filled with
a special gel that has shock absorbing properties very similar to those of
inflatable wheels.
Thanks to the possibility of dismounting both the wheels and their axle, the
stroller is smaller after folding, which facilitates its transport and storage.
The wheel assembly mechanism is mounted inside the rear wheels and
ensures quick assembly and disassembly of the rear wheels. It is started by
pressing the quick assembly clamp (Fig. 9.6.1) towards the center of the
wheel, after which the rear wheel can be mounted on the rear wheel axle or
the rear wheel can be removed from the rear wheel axle.
Wheels mounting on axle
When installing the rear wheel on the rear wheel axle, press the clamp in the
center of the wheel and put the wheel on the beginning of its axle. Then stop
pressing the clamp and continue sliding the wheel onto its axle until it clicks.
The correct wheel placement is demonstrated by the clear "click" sound
coming from the quick axle rear axle mounting mechanism.
Dismantling the wheels from the axle
In order to remove the rear wheel from the rear wheel axle, press the clamp in the middle of the wheel
and slide the wheel out of its axle. - Fig. 9.6.2.
Rear wheel amortization system
The stroller is equipped with spring-loaded cushioning of the frame and rear
wheels, located at the ends of the rear legs of the frame, when in contact
with the crossbeam. Amortization works automatically. The adjustment is
done by activating the up-down lever located from the bottom of the shock
absorber. In order to facilitate the switchover of settings by the lever,
simultaneous pressure on the shock absorber spring is allowed. When the
lever is shifted, the shock absorber spring will be compressed (option for
hard ground) or extended (soft ground).
Ergonomic handle for pushing the stroller. Mechanism and angle adjustment of the handle.
The handle is used to push the stroller, providing a firm grip in various
driving conditions. It has the ability to adjust the height of the handle for
the child's assistant who drives the stroller - Fig. 9.8
Adjustment mechanism.
These are two buttons on the outside of the frame, located on the joints
of the handle to push the stroller.
Angle adjustment of the stroller push handle
To change the angle of the stroller push handle, push both buttons of the
angle adjustment mechanism of the push handle and change its angle.
Fig. 9.7
Fig. 9.6.1
Fig. 9.6.2
Fig. 9.8