YETI
Edition 7 / 2022-10-25
12 |
P a g e
Folding the stroller frame
To fold (close) the stroller frame: release the frame folding mechanism lock
by pulling it up and pull both frame folding handles up until the frame is
released. (Fig. 9.3) Then fold the stroller frame folding it forward in the
direction of the front wheels. Make sure that the push handle and footrest
are in a non-colliding position. Then pull the backrest release mechanism. Put
on a transport lock.
Transport lock. Installing and removing the transport lock
The stroller is equipped with a transport lock, which serves to protect the
folded (closed) stroller frame against its automatic opening during transport
and storage.
The transport lock consists of two parts: an eyelet and a pin (male element).
In order to secure the frame against its automatic opening, first fold the
frame, and then put the locking eye on the locking pin so that both of these
elements closely overlap (Fig. 4.4.).
To unlock the transport lock, before unfolding the frame, remove the locking eye from the locking bolt
and only then can the unfolding of the stroller frame be started.
Swivel front wheels. Locking the direction of travel of the front wheels
The used, durable wheels guarantee the highest quality of stroller driving, driving pleasure and elegant
appearance. The tires are tubeless, filled with a special gel that has shock absorbing properties very similar
to those of inflatable wheels. The wheels are factory-fitted to the front wheel forks, which are finished
with top steering axles from above.
Both front wheels can be set for straight-ahead or unlocked for turning, which makes it much easier to
maneuver the stroller. Thanks to the locking of the direction of travel of the front wheels and the
possibility of putting it on or taking off, there is clearly greater comfort for both the child and the assistant
when driving the stroller.
It is recommended to remove the lock and allow the front wheels to turn while driving the stroller on a
completely smooth surface, e.g. in shopping centers, school.
In the event of uneven surfaces, moving on sloping
surfaces, when crossing thresholds or curbs, it is
recommended to install the lock and block the turning
of the front wheels.
To prevent the front wheels from turning, put the lock
knob into the gap - see Fig. 9.5.1. To unblock the
turning of the front wheels, pull back and turn the
locking knob and leave them outside the gap - see Fig.
9.5.2.
Fig. 9.5.1
Fig. 9.3
Fig. 9.4
Fig. 9.5.2
