background image

 

  

YETI 

 Edition 7 / 2022-10-25 

 

28 | 

P a g e

 

 

the weight of this element exceeds 23kg. It is recommended that the stroller be carried by 2 people. 

When carrying or lifting the stroller frame with the wheels mounted, fold the stroller frame and then hold 

the stroller frame only by the frame's fixed elements.

 

For safety reasons, do not lift the entire stroller, i.e. the frame with the seat and backrest, wheels, footrest 

and mounted accessories, as this may damage your health. 

Do not lift the stroller by its footrest or safety barrier, therapy table or any other accessories, as this may 

damage the product and endanger the safety of others. 

 

Getting on and off the stroller 

When getting on and off the stroller, place the stroller as close as possible to a stable and safe place where 

the user will change. After making sure that the central brake is on and the footrest is raised to avoid 

standing on it, the user can change. 

Do not stand on the footplate, as there is a risk of tipping over the stroller, injuring the user and damaging 

the product. Make sure that when getting in or out of the stroller, the child and any other person should 

not stand on the footrest, as this may damage it and injure the user!

 

 

Correct position in a stroller 

For  safety  and  health  reasons,  it  is  recommended  that  the  user  have  the  pelvis  and  back  as  close  as 

possible to the backrest as much as possible to support the spine evenly (optimal support for all parts of 

the spine so that there is no free space).  

The thighs should be supported on the largest possible surface, along their entire length, which is used to 

adjust the depth of the stroller seat (see point 9.11), and the feet should be supported on the footrest 

plate (see point 9.15), which prevents slipping, maintains optimal leg muscle tension and carries some of 

the weight from the upper body. 

Due to the large adjustment possibilities of the stroller, during the angular adjustment of the seat and 

angular adjustment of the backrest, it is possible to set the position in which the child's head is below the 

pelvic line. It is forbidden to use this position as it could lead to the risk of the child choking.

 

 

Riding in a stroller 

When using the  stroller, always hold the handle to push the  stroller to prevent the wheel from rolling 

slowly. Release the central brake while holding the push handle of the stroller and push the stroller in a 

safe direction.  

 

Moving on slopes 

Always position the stroller forwards when climbing or driveways. Limit the speed on sloping surfaces and 

move  as  slowly  as  possible.  The  stroller  assistant  (parent,  guardian)  must  have  sufficient  strength  to 

control the stability of the stroller. 

Always remember that the stroller's center of gravity changes when it overcomes unevenness or slopes 

on the ground. In this case, be extremely careful and secure the stroller. When using ramps, make sure 

that the ramp is suitable, that the wheels of the stroller are high enough to overcome the ramp, that the 

frame of the stroller will not touch the ramp, and that a second person should be provided as there is a 

risk of the stroller tipping over, damaging the product and injuring the user. 

Summary of Contents for Yeti




































Reviews: