YETI
Edition 7 / 2022-10-25
14 |
P a g e
After setting the handle in the correct position, stop pressing the buttons, which will automatically lock
the push handle in the desired position.
Central brake. Applying and deactivating the brake
The central brake pedal (Fig. 9.9), which when pressed blocks the two rear
wheels of the stroller directly, is located in the middle of the crossbeam, at the
rear of the stroller frame.
Central brake on and off
To apply the central brake, press the brake pedal down towards the ground
until it clicks. The correct activation of the brake is indicated by a clear "click"
sound from the central brake.
To disengage the central brake, pull the brake pedal up.
Tilting foot
The tilting foot (Fig. 9.10) is located on the right side of the crossbeam, at
the rear of the stroller frame. In order to use it, press the tilting foot and at
the same time pull the handle to push the stroller, which in turn will cause
the front of the stroller to rise up together with the front wheels.
Using the tilting foot makes it easier for the stroller to climb onto small steps
or curbs.
Frame adjustment in terms of seat depth
The stroller has the option of adjusting the seat depth. To do
this, activate the central brake so that the stroller is stable
and immobilized, then loosen the screw with an Allen key
from both sides of the frame (locking position) and extend or
slide the seat frame (seat frame) evenly into the desired
position. The correct position must be secured by tightening
the screw on the sides of the frame. The frame can be pulled
out leaving a minimum of 15cm overlaps of steel frame
elements. See Fig. 9.11
The frame adjustment is in the range of 30 to 45 cm. The
adjustment range of seat upholstery is described in point
10.2.
Fig. 9.9
Fig. 9.10
Fig. 9.11
