YETI
Edition 7 / 2022-10-25
16 |
P a g e
value. The backrest should be locked by releasing the cable releasing the lock and making sure that the
lock clicks on both sides of the stroller at the same time (it goes deep into the combs).
When changing the position of the backrest, it is necessary to adjust the upholstery. The upholstery
adjustment range is described in point 10.3.
The angle adjustment mechanism of the backrest changes the position of the backrest on the back
relative to the therapeutic seat in six positions, from sitting at right angles to almost fully lying position.
The angle between the backrest and the seat is in the range of 90
˚
-
160˚ every 10˚ (
measured from level).
Caution! Each change in the angle of the backrest requires a readjustment of the five-point belt length.
Footrest. Regulation and use.
The adjustable footrest is included in the standard equipment of the Yeti and the Yeti Young stroller.
It consists of a footrest plate bolted to the footrest frame, with the possibility of moving the plate up or
down in 7 positions to adjust the height of the footrest to the length of the user's thighs, in the range from
28.5cm to 43.5cm.
Footrest height adjustment.
To change the height of the footrest, unscrew the knobs on the two
screws that secure the footrest to the frame on both sides of it, then
set the footrest at the appropriate height and screw it back with both
screws, tightening them with the knobs until you feel resistance. (Fig.
9.15.1)
Angle
adjustment
mechanism of the entire
footrest
The mechanism is located in
the front of the seat and
connects them to the footrest
frame. They are two plastic, black joints with buttons inside (see Fig.
9.15.2). This mechanism is used to change the angle of the footrest
in relation to the seat, allowing you to choose the appropriate one
of eight positions
(range from 10˚ to
-
90˚, every 20˚, measured from
level). To change the angle of the footrest, press the footrest angle
adjustment mechanism on both sides of the footrest, then set the
appropriate position and release the buttons. The footrest angle
adjustment mechanism during use should be secured with
upholstery wrappers (see point 10.2).
Use of a footrest.
It is recommended to position the footrest at such a height that the child's feet can rest freely on it with
their entire surface, while the child's thighs are parallel to the seat surface. There are straps in the footrest
plate to secure the child's feet. It is recommended to put them on when using the stroller.
Fig. 9.15.1
Fig. 9.15.2
