MyWam Yeti Operation And Maintenance Manual Download Page 2

Page: 2 / 35

YETI

Edition 7 / 2022-10-25

2 |

P a g e

ATTENTION!

Users with sight, reading or cognitive

impairment are requested to report to the Manufacturer in

order to obtain information in the appropriate format.

Purpose of the Manual

The operation and maintenance manual contains basic information necessary for the correct use of the

Yeti and Yeti Young strollers, including the principles of safe use, description of its construction, operation

and adjustment, preparation of the stroller for operation, how to maintain and clean the stroller, and

warranty conditions.

It is designed for persons who directly care of children with disabilities (childcare assistans, parents,

guardians), which will be transported in a stroller. It is also intended for doctors and physiotherapists

operating the stroller.

ATTENTION! Before using the stroller, each User is obliged to read the manual and act in accordance with

its guidelines.

This manual is an integral part of the product and must always be attached to the product wherever being

sold. Keep this manual for future reference! Keep the manual in an easily accessible place. The manual in

the electronic version is available on the website www.mywam.eu

ATTENTION! In the event of any medical incidents related to the presence of the Yeti and Yeti Young

strollers, the Manufacturer must be immediately notified in writing by contacting it via registered letter

or e-mail with acknowledgment of receipt.

Manufacturer's contact details:

● Postal address: MyWam sp.j., ul. Szczecińska 10, 41

516 Chorzów, Poland

● contact phone number: +48 32 733 11 31

● e

-mail address: [email protected]

User and maintenance manual version:

EN Edition 7 / 2022-10-25

MyWamKupiec, Bartold, Angres sp.j. reserves the right to make technical and commercial changes to the

content of the Operation and Maintenance Manual without prior notice. Each change will be determined

by the date the instructions were last updated .

Summary of Contents for Yeti




































Search results

Summary of Contents for Yeti

Reviews:

Related manuals for Yeti

Brands by name

Popular brands

MyWam Yeti, Operation And Maintenance Manual

Search results

Summary of Contents for Yeti

Reviews:

Related manuals for Yeti

Brands by name

Popular brands