YETI
Edition 7 / 2022-10-25
17 |
P a g e
Normally the footrest plate is in a horizontal position. However, during transport, storage, rehabilitation,
getting on and off the stroller, the footrest plate must be folded and turned towards the footrest frame.
10.
Configuration and use - therapeutic seat with backrest
Stroller upholstery. Installation of upholstery on the stroller frame. Disassembly.
The stroller upholstery consists of several elements: upholstery base, seat upholstery, back upholstery
and frame wrappers.
Upholstery installation.
Before adjusting the upholstery, the frame: backrest height, seat depth and footrest height must be
adjusted accordingly. See point 7.12.
In order to mount the upholstery on the frame of the stroller, place the
upholstery base
in the place
of the seat with the help of adjustable tapes (Velcro), stretching them thoroughly. The top of the
upholstery base is characterized by longitudinal Velcro, to which the right upholstery will be later
attached. Mount the upholstery base strips from the bottom, wrapping them on the seat frame (from the
outside). The first Velcro from the footrest side is still mounted on the plastic fragment of the bent, but
from the inside of the seat. We wrap the excess of upholstery in the minimum seat setting at the back of
the seat. The upholstery base should be properly stretched, allowing the wrapper to be attached to the
frame in the places of the seat folds (in contact with the footrest, on the right and left).
Frame wrappers
are designed to protect the places of the folds from friction of the user. To ensure
comfort for the user, they should be mounted with Velcro down on the plastic elements of the bents.
We put the
backrest upholstery
on the base of the upholstery and fix it with straps at the back,
wrapping the frame from the outside. If the minimum backrest height is used, the excess upholstery is
wound from the top onto the frame and pulled with straps adjusting to the right distance through the
lower buckle. If the backrest is extended to the maximum, we put the upper part on the frame and pull it
through the upper buckle.
To properly mount the side covers of the stroller upholstery, it is recommended that the backrest be
positioned to position 45
0
and secured with Velcro on the right and left of the stroller in two places on
the side frame (when the frame folds). After placing the backrest in an upright position, the excess
upholstery from the sides can be collected with strings with clamps.
Finally, put on the
seat upholstery
, arranging and adjusting it to the Velcro on the upholstery base.
Excess upholstery drag under the upholstery of the backrest
and wrap up (on the back) under the backrest upholstery
strips. The belt that installs the seat upholstery (mounted
underneath the seat embracing the frame from the outside)
should fit over the first Velcro of the base upholstery and
should not interfere with the frame wrapper. Attach the
bottom part of the seat upholstery with Velcro to the footrest
frame.
The stroller seat upholstery has an additional strip of
material connecting it to the barrier. If it is not needed, it can
be hidden by dragging in a dedicated slot - see Fig. 10.1.
Fig. 10.1
