MyBinding DC-545HC, Service Manual

Page: 72 / 175

69
n
Creaser Section
(1) Removing the Creaser Motor
q
Remove the cover L unit from the DC-545.
\
See page 50
w
Take out the 6 screws, and remove the lid.
\
See page 50
e
Remove the main P.W.B.
\
See page 90
r
Take out the 3 screws, and remove the plate.
t
Remove the motor connector and Power Supply
PCB connector.
y
Loosen the set screws, and remove the pulley unit.
u
Take out the 4 screws, and remove the creaser motor
assembly.
(2) Removing the Creaser Sensor
q
Remove the cover R unit from the DC-545.
\
See page 49
w
Remove the connector for the sensor. (1 position)
e
Remove the creaser sensor from the sensor angle.
Screws
Connector
Pulley Unit & Set Screw
Connector
Sensor
n
Creaser Section
Chap.3