MyBinding DC-545HC, Service Manual

Page: 73 / 175

70
n
Creaser Section
Chap.3
(3) Removing the Creaser Assembly
q
Remove the cover R unit from the DC-545.
\
See page 49
w
Remove the cover L unit from the DC-545.
\
See page 50
e
Take out the screw, and remove the cover (front).
r
Take out the screw, and remove the cover (rear).
t
Take out the 4 screws, and remove the upper cover.
y
Take out the 4 screws, and remove the creaser belt.
u
Take out the screw, and remove the pillar from the
main rear drive.
i
Remove the timing belt.
o
Take out the screws, and remove the sensor plate.
!0
Take out the 4 screws from the auxiliary plate
(upper).
!1
Pull the creaser assembly out opposite the operation
side.
Reinstallation
IMPORTANT:
• Make adjustments after installing the
creaser assembly.
\
See page 108
Timing Belt
Cover (Rear)
& Screw Upper Cover & Screws
Cover (Front)
& Screw
Creaser
Assembly
Pillar & Screw Screws
Auxiliary Plate (Upper)
Screws
Sensor
Plate
Screw