MyBinding DC-545HC, Service Manual

Page: 82 / 175

79
,
Driving Section
(1) Removing the Main Motor
q
Remove the cover L unit from the DC-545.
\
See page 50
w
Take out the screw, and remove the pillar.
e
Remove the main belt.
r
Remove the connector for the stepper driver PWB
CN2. (1 position)
t
Take out the 3 screws, and remove the main motor.
(2) Removing the Feed Stepper
q
Remove the cover L unit from the DC-545.
\
See page 50
w
Take out the 2 screws on the motor plate, and
remove the timing belt.
e
Remove the connector for the motor. (1 position)
r
Take out the 4 screws, and remove the feed stepper.
Screws
Pillar & Screw Main Belt
Screw
Timing Belt
,
Driving Section
Chap.3